• Home
  • news
  • How the grinding o magnetic stainless steel?
How the grinding o magnetic stainless steel?

First of all, stainless steel, which is divided into two kinds, one is magnetic, one is no-magnetic, the magnetic stainless steel for the processing of the outer surface is very easy, sucked directly in the grinding machine's magnetic field, there is no Magnetic stainless steel, most of the use of production jigs will be caught in the period, so that the high cost and manpower.

In fact, there are many ways to have no magnetic stainless steel finish after grinding,

Stainless steel processing technology refers to the performance of stainless steel with stainless steel shear, folding, bending, welding, and other mechanical processing of the final production of stainless steel products needed for the process, in the process of stainless steel processing with a large number of machine tools, instruments, stainless steel Processing Equipment. And the machine is separated into shear equipment and surface treatment equipment, cutting equipment is divided into plating equipment and slitting equipment. In addition, from the thickness of stainless steel, there are hot and cold rolling equipment points. The cutting equipment mainly had plasma cutting, laser cutting, water cutting and so on. What matters need to pay attention when we process stainless steel?

1, keep a good working environment.

2, when welding must not wear professional gum gloves for processing, because the temperature is too high when welding so that gum gloves will easily be melted by high temperature.

3, don’t touch the tool by hand during the welding.

4, stainless steel plate cutting, the stainless steel plate should be moved to a dedicated, stainless steel material stack is prohibited on the cutting directly.

5, using manual arc welding, the connector on both sides should be 100mm range of anti-splash coating easy to remove spatter.

6, we need to control stainless steel repair times for welding, there is resistance to corrosion requirements, the weld repair should still maintain the original requirements.

7, stainless steel pressure vessel manufacturing should be independent, closed production workshop or a dedicated fixed production site should be strictly isolated with carbon steel products.

INQUIRY NOW